With the acceleration of the urbanization process, large-scale demolition and maintenance of roads have been started all over the country. Pavement maintenance requires the use of pavement cold recycling machine. Let's learn about it!

一般來說，長期經受重型交通的路面會出現路基損壞的情況。為了消除這種損壞，需要對整個路面進行結構性維修。路面冷再生機將銑刨料全部進行重新利用，加之其經濟的處理方式，使得采用泡沫瀝青進行冷再生施工成為一種開創性解決方案，終達到環保而經濟的作用。

Generally speaking, the pavement that has been subjected to heavy traffic for a long time will be damaged. In order to eliminate this damage, the whole pavement needs to be structurally repaired. The pavement cold recycling machine reuses all the milled materials, and its economic treatment method makes the cold recycling construction with foam asphalt a pioneering solution, and finally achieves the environmental protection and economic effect.

路面冷再生機的組成和工作原理

Composition and working principle of pavement cold recycling machine

組成：路面冷再生機是瀝青路面冷再生施工中的主要設備，一般由 動力系統、傳動系統、工作裝置、噴灑系統和操縱控制系統組成。

Composition: the pavement cold recycling machine is the main equipment in the asphalt pavement cold recycling construction. It is generally composed of the power system, transmission system, working device, spraying system and operation control system.

工作原理：路面冷再生機向前行進時，轉子向上旋轉銑刨原路面材料，同時， 水通過軟管從路面冷再生機連接的水車中輸送過來，并在路面冷再生機的拌和倉中噴灑。水的輸送量通過微處理器控制的泵送系統準確控制，以達到需要的含水量。銑刨轉子將水與銑刨料充分拌和。液體穩定劑，例如熱瀝青 (冷再生機自帶泡沫瀝青發泡裝置，可將熱瀝青加熱到160- 180 °C，與少量水混合發泡)可通過專門設計的噴灑嘴被噴灑到拌和腔；粉狀穩定劑如水泥需按設計添加量事先灑布在路面冷再生機前的路面上，路面冷再生機將粉狀穩定劑與再生料和水一次性拌和。如遇再生層原級配不良的情況，可在再生前將所缺少的部分集料灑布在 路面上，通過與舊料拌和來改善原路面材料的級配。

Working principle: when the road surface cold regenerator moves forward, the rotor rotates upward to mill the raw road surface materials. At the same time, water is transported from the water truck connected to the road surface cold regenerator through the hose and sprayed in the mixing bin of the road surface cold regenerator. The delivery volume of water is accurately controlled by the microprocessor controlled pumping system to achieve the required water content. The milling rotor shall fully mix the water with the milling material. Liquid stabilizers, such as hot asphalt (the cold regenerator is equipped with foam asphalt foaming device, which can heat the hot asphalt to 160-180 ° C and mix it with a small amount of water for foaming), can be sprayed into the mixing chamber through specially designed spray nozzles; The powdery stabilizer such as cement shall be sprinkled on the pavement in front of the pavement cold regenerator according to the designed addition amount. The pavement cold regenerator will mix the powdery stabilizer with recycled materials and water at one time. If the original gradation of the recycled layer is poor, the missing aggregate can be distributed on the pavement before regeneration, and the gradation of the original pavement material can be improved by mixing with the old material.

路面冷再生機的施工方法在全球范圍內已得到普遍認可，它在瀝青路面的維修方面受到了道路建設部門和建筑公司越來越多的關注。

The construction method of pavement cold recycling machine has been widely recognized in the world. It has received more and more attention from road construction departments and construction companies in the maintenance of asphalt pavement.

以上就是為大家介紹的有關冷再生機租賃的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.lzqdw.com

The above is the detailed introduction of the cold regenerator rental for you. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.lzqdw.com